Friday,Sep2,

AC Repair - Bent fins

When it comes to repairing AC, a lot of people to automatically find the first book to be called technical. While this is an effective tool for the job can be done, it can also amount to some pretty expensive bills. The truth of the matter, you could easily have taken matters into their own hands and repair the equipment yourself and save some 'time and money. While there are certainly many repairs that really need a coach who isare actually quite a bit 'you can do yourself.

To stay cool this summer, the AC unit is working properly. If there is something wrong with the device, it will stop working and freeze after a short period of time. Of repairs you can do yourself, perhaps the most basic is to do with the fins are curved. These are thin metal parts along the side of the device. These fins should be straight, but can be folded in various ways. This article will guide you throughthe necessary measures to remedy the.

Step 1 - Unplug the unit

Repair prior to acceptance at any BC, you must ensure that the device is turned off. In cases where the repair can be performed on a central or split air conditioning, the device must be turned on the switch. The decision may be based on a unit with the power of labor lead to serious injury and should be avoided at all costs.

Step 2 - Removing Housing

To reach the fins, isYou need to find the true air-conditioner from the body in a couple of screws from the front and pull out the front of the device is removed. Solve all the little screws on the sides and the ground wire before connecting the unit.

Phase 3 - Vacuum

Once you log on to the ribs, with a vacuum cleaner to remove dirt and debris.

Step 4 - comb fins

Most of the combs have different settings, adapt to the situation. This is due toFact that there are different dimensions of the fins. Use this tool to determine proper lamellar spacing.

Step 5 - AC Repair

After thinking that right away, we walk through the curved blades. Start moving from bottom to top, to straighten it. If you do not see a fin comb, needle-clamps will do the trick usually.

Step 6 - Place the unit

Once the repair is complete, replace the unit back into itsAccommodation. Make a backup copy with the screws removed and the ground wire. That's it! You did it!

android market free design software USB Storage

Danos tu comentario