Stroke Troubleshooting

There are several parts of a network, what can go wrong. You must make sure that every part of the network is functioning properly, including network cards, cables, connectors, switches, hubs, routers, network hardware, etc. is not the only thing that needs to be configured correctly, can be software problems as well.

Here we will discuss some of the hardware aspects of the turntable. A hub and a switch have much the same function. Hubs, switches they replaced, so that when the search for goodTroubleshooting for a hub is tough, try a search for information Ethernet switch can be easily implemented in a hub.

The speed of the network will only work as fast as your slowest component, if you have a 10/100 megabits per second shot. If you have an old computer with a 10 megabits per second (Mbps) network adapters have to upgrade to a 100 Mbps network card.

The length of the cable also plays a role in the speed of the network. The maximum length for an RJ-45a network of 10 or 100 Mbps is 328 feet. The cable length between two 10/100 Mbps router must be 15 feet or shorter.

Control how the cables are positioned, if you have long cable. Make sure the network cable is not connected to each other in roles. This can lead to electromagnetic fields that the data transmission between the two Ethernet ports for the mind.

It 'important for the correct routing of the Ethernet cable. Try to keep the cables close to lamps, power outlets and power supplies. Thismay emit strong electromagnetic interference between the two Ethernet ports, and create.

Make sure the connectors on the Ethernet ports line up. Pins 1, 2, 3 and 6 must be aligned exactly, or you may have trouble connecting. Use a CAT5 cable for best results.

You can no more than two 10/100 Mbps hubs together. To connect the hubs together to ensure that the uplink port. If there is no uplink port, then you have crossed with a network cable.

USB Storage HP Wireless Printer free design software